Carolyn's Yellow Foam Flashlight

Last class I made a button for my yellow foam flashlight. After carving it out of the foam I attached it with apoxy and then used spot putty so it made a smooth transition into the rest of the flashlight. To a cut out the whole for the lens using a spade bit on the drill press. I then drew the lens on illustrator and had it out out on the lazor cutter.

Blue Foam Hammer

Your Blue foam hammer is completed. To paint it we used a waterbased primer in the paint gun. Next we painted it with white paint. After that we had to sand down all the holes in the handle of the hammer and paint them by hand because the paint gun would not fill them in.